Dual Alternating

VIP-1E Control – Duplex Alternating Softener

Fiberglass Tank Alt 2

  • Duplex alternating operation; No hard water bypasss during regeneration.
  • VIP-1E electronic metered or time clock feature & UL listed.
  • Solid state single metered initiated regeneration including rate of flow meter, re-settable totalizing meter & self diagnostic status monitoring. NEMA enclosed controller; Delayed or immediate regeneration.
  • Lead-free brass multiport control valves with self-cleaning, hydraulically balanced positive acting piston.
  • Timed brine refills (eliminates constant line pressure on shut off float devices).
  • Standard safety-float valve shutoff on 400/700lb brine tanks. Optional on 1000lb and larger sizes.
  • High strength polyethylene tank liners for longer service life, FRP wrapped for strength and corrosion resistance. ANSI/NSF listed tanks.
  • 120V/60Hz/1pH transformer included/ twist lock style electrical connections/ 24V control voltage.
  • Optional: Brine reclaim.
Pipe SizeFleck® Valve TypeModel NumberPart NumberCapacity (grains)Mineral Tank Size (inches)Brine Tank Capacity (LBS)Brine Tank SizeShip. Wt. Lbs.
1”2750S-31A-ALT21100041930,0009” x 48”40018”x40”350
1”2750S-61A-ALT290230360,00012” x 52”40018”x40”490
1”2750S-91A-ALT290230790,00014” x 65”40018”x40”680
1.5”2850S-91B-ALT290231190,00014” x 65”40018”x40”700
1.5”2850S-121B-ALT211000004120,00016” x 65”70024”x41”970
1.5”2850S-151B-ALT211000008150,00018” x 65”70024”x41”1,130
1.5”2850S-301B-ALT2902339300,00024” x 72”1,00024”x50”2,270
2”2900S-121C-ALT211000020120,00016” x 65”70024”x41”1,060
2”2900S-151C-ALT211000023150,00018” x 65”70024”x41”1,160
2”2900S-301C-ALT2902360300,00024” x 72”1,00024”x50”2,000
2”2900S-451C-ALT2902363450,00030” x 72”1,50030”x50”2,980
2”2900S-601C-ALT2902366600,00036” x 72”2,50039”x48”3,760
3”3900S-451E-ALT211000926450,00030” x 72”1,50030”x50”3,030
3”3900S-601E-ALT2902369600,00036” x 72”2,50039”x48”3,880
3”3900S-901E-ALT211000927900,00042” x 72”2,50039”x48”5,670
3”3900S-1201E-ALT2110009281,200,00048” x 72”4,50052”x60”7,340


Note: 1″, 1.5″ and 2″ flow meters supplied with above products are plastic.  3″ and 4″ are insertion type paddle wheel flow meters utilizing copper tees.  Other materials are available on special order.