Fleck 9000 Residential Twin Control Valve
The Fleck 9000 residential twin control valve controls the regeneration of both tanks in a twin alternating softener and is ideal for twin residential or light commercial water softeners up to 16” diameter tank size. The 9000 valve body is offered in the classic mechanical design for rugged construction and simple operation, as well as in the 9000 SXT Electronic Programmable style for an extended range of settings and options capabilities.
Fleck Control Valves automatically control the backwash and regeneration cycles for water softeners to keep your water softener working at optimal performance all the time. Twin alternating softeners are metered for on-demand regeneration when a pre-set volume of water has been used. Ideal for situations where uninterrupted flow of soft water is a must twin softeners consist of two resin tanks. One resin tank is always in service, while the other tank is in standby. When the meter determines that the resin is near its capacity, it will switch the tank in standby to be in service, and the tank containing the exhausted resin switches into regeneration, and then into standby.
- Fleck Lead-free brass valve body for superior strength and durability
- Continuous service flow rate of 21 GPM with a backwash of 8.5 GPM
- Backwash capability accommodates softener tanks up to 16″
- Fully adjustable 5-cycle control for efficient and reliable water treatment system
- Time-tested, hydraulically-balanced piston for service and regeneration
- Rugged-built electromechanical timer designed with heavy-duty 3/8″ wide plastic gears
- Salt and water savings by using 100% capacity of the tank in service before switching to the second tank
- Regenerates immediately when needed for continuous soft water
- Regenerates with soft water keeping system clean for optimum operating efficiency and minimum maintenance
Manufacture: Fleck
Model Number: 9000
Valve Size: 3/4″, 1″, or 1-1/4″
NPT/BSP/Sweat
Availability: In-Stock
Valve Specifications
| Valve Material | Lead-free brass* |
| Inlet/Outlet | 3/4″, 1″, or 1-1/4″ NPT/BSP/Sweat |
| Cycles | 5 |
Flow Rates (50 psi Inlet) – Valve Alone
| Continuous (15 psi drop) | 18 GPM (4.1 m3/h) |
| Peak (25 psi drop) | 23.5 GPM (5.5 m3/h) |
| CV (flow at 1 psi drop) | 4.7 |
| Max. Backwash (25 psi drop) | 8 GPM (2 m3/h) |
Regeneration
| Downflow/Upflow | Downflow only |
| Adjustable Cycles | Yes |
| Time Available | 0-240 Minutes per Cycle |
Meter Information
| Meter Accuracy Range | 0.25 – 15 GPM ± 5% (0.06 – 3 m3/h) |
| Meter Capacity Range (gal.) | 125 – 2,125 gal (0.5 – 8 m3) |
Dimensions
| Distributor Pilot | 1.05″ O.D. (32 mm) |
| Drain Line | 1/2″ NPTF Quick-Connect |
| Brine Line | 3/8″ |
| Mounting Base | 2.5″– 8 NPSM |
| Height From Top of Tank | 6.5″ (165 mm) |
Typical Applications
| Water Softener | 6 – 16″ Diameter |
| Filter | 8 – 16″ Diameter |
| Electrical Rating | 24/110/220V 50/60 Hz |
| Max. VA | 8.25 |
| Estimated Shipping Weight | 19 lbs |
| Pressure | Hydrostatic: 300 psi Working: 20 – 125 psi |
| Temperature | 34 – 110 Degrees F |
