Fleck 5800 SXT Control Valve
The Fleck 5800 SXT control valves are Fleck’s most modern yet easy to service valves, as the valve has very few moving parts as well as using snap-together plates and a single programming board. An LCD backlit display helps to program in low light conditions. The control setup of capacity, regeneration time and days override is quick and easy. The SXT controller also allows for additional programming of up to 20 different cycle steps. Learn more about the 5800 series here.
Available Sizes
- 8″ x 44″ for 0.75 cubic foot
- 9″ x 48″ for 1.0 cubic foot
- 10″ x 54″ for 1.5 cubic foot
- 12″ x 52″ for 2.0 cubic foot
- 13″ x 52″ for 2.5 cubic foot
- 14″ x 65″ for 3.0 cubic foot
- Fiber-reinforced polymer valve body for superior strength and durability, non-corrosive, and UV-resistant
- Continuous service flow rate of 21 GPM with a backwash of 17 GPM
- Backwash capability accommodates softener tanks up to 16″ and filters up to 16″ in diameter
- Fully adjustable 3- or 5-cycle control for an efficient and reliable water treatment system
- Time-tested, hydraulically-balanced piston for service and regeneration
- Optical sensor for precision cycle positioning
- Soft water refill for a cleaner brine tank
- Designed with double backwash for reduced hardness leakage
- Diagnostics for historical valve performance
- Programming stored in memory and will not be lost due to power outages
Valve Specifications
| Valve Material | Fiber Reinforced Polymer |
| Inlet/Outlet | 3/4″ or 1″ NPT/BSP/ Sweat |
| Cycles | 5 |
Flow Rates (50 psi Inlet) – Valve Alone
| Continuous (15 psi drop) | 21 GPM |
| Peak (25 psi drop) | 27 GPM |
| CV (flow at 1 psi drop) | 5.4 |
| Max. Backwash (25 psi drop) | 17 GPM |
Regeneration
| Downflow/Upflow | Both |
| Adjustable Cycles | Yes |
| Time Available | Up to 199 Minutes per Cycle |
Meter Information
| Meter Accuracy Range | 25 – 15 GPM +/- 5% |
| Meter Capacity Range (gal.) | 1 – 999,900 gal |
Dimensions
| Distributor Pilot | 1.05″ O.D. (26.7 mm) |
| Drain Line | 1/2″ NPTF Quick-Connect |
| Brine Line | 1600 – 3/8″ |
| Mounting Base | 2.5″– 8 NPSM |
| Height From Top of Tank | 9″ (228 mm) |
Typical Applications
| Water Softener | 6 – 16″ Diameter |
| Filter | 8 – 16″ Diameter |
| Electrical Rating | 12 Volts DC |
| Max. VA | 8.4 |
| Estimated Shipping Weight | Time Clock: 6 lbs Metered Valve: 7 lbs. |
| Pressure | Hydrostatic: 300 psi Working: 20 – 125 psi |
| Temperature | 34 – 110 Degrees F |
